lom

No it is not and by saying that you also say that the 90 day report is a visa. The date they want is the date in your passport of the "Permission to stay until" stamp. STAY visa is the keyword. There is nothing from a 90-day report receipt that you need to fill in when you do a new one.

There is no visa expires date on the 90 day report receipt you get after doing an online report. ss

No it is not. A 90 day report is not a visa, the date is the expiry date of stay and it clearly says so.

You have obviously never done a TM47 90-day report online. You are asked for 2 dates, "Arrival Thailand Date" and "Stay visa expires" , the latter being the date your "permitted to stay until" stamp in your passport indicates.

They will loosen up again, sorry to be repetitive but you are using a flat lug that will have a very limited contact surface with the switch. It doesn't bottom out so the pressure on it will deform its side edges with time and that is when it get loose again. Don't ask me how I know this..

I know exactly what you're experiencing, I have two grand children living with us and they have each their own room.. Me: Not a degree below 27 on the remote or I'll cut down on your candy and your school money!

My way of doing it in the battery room under the house. 50sqmm feed, switch, 35sqmmx2 to the250A fuse and the busbars. Two battery stacks of each 4x5KWh (=40KWh) connected to the busbars.

That is flat lug and it should only be used in a switch that has a flat bottom, not a round bottom like your switch has. Its connection to the switch is only on the side edges when you use it as you do

Looks like you are using some kind of lug on the wires, maybe DZ47/C45 lugs like this: the switch however is intended for bare wire which you can see from its rounded bottom. I use DIN-rail enclosures for all my other switches but the battery DC switch I used is this one: it has proper M8 hex bolts and not weak Philips type screws..

Maybe you could do a one-time exception to your rule just for test purpose?

500 baht you or your Samui landlord must have done a TM30 report

It most likely is.

Some 1-year dTac cards does not have to expire, you can fill them up at a dTac shop for another year.

Elon should have built his mega-battery in Grünheide instead of building it in Australia.

That means that you can temporarily overload your meter up to 50++ Amp somewhere above that your fuse will trip but your meter could withstand up to 100A (before it heats up so much that it starts to spin slower ☺️ )

A 15/45A single phase meter can withstand 15A continuously and 45A for a short time, not 45A continuously! The same goes for a 30/100A 3-phase meter, it is 30A per phase continuously.

Interesting to see that I'm not the only one to have a consumption peak 31/3, our daily consumption during March was 52KWh ± 3KWh with 0.5KWh daily purchase from the grid (because current transformers in wrong place) and no feed-back to grid. 31/3 we had the record consumption of 68.4KWh and we had to buy 6KWh, I'll have to rectify that purchase today 😁

What could make a difference is telling them that you need the account in order to apply for a non-O visa.

Very Austrian name..

There is probably something not so good about your "real me" if they start to dislike you when they get to know you. Your persona probably needs more drastic changes than a new after-shave lotion...

That sounds very unlikely to me. Arrested for a week or two until the investigation is finished? In a democratic country? No... Edit: He was brought in for questioning and then released, that's not arresting.

Why would he be arrested if the "runaway" was due to a car fault? There's more to this than what is reported..

Global House

I was once told that the max span PEA do is 20m.

That's what Thai PBS said, Srettha himself said "he may have an opportunity to..."