Jump to content

luudee

Advanced Member
  • Posts

    993
  • Joined

  • Last visited

Everything posted by luudee

  1. The problem is that almost all shops that work with Aluminum profiles, all they do is cutting them and putting structures together for windows, etc ... At least the shops that I've been to, are like that - none were able to accommodate me so far ... I need a shop that can take a 3 mm thick aluminum plate, cut it, punch out the holes, and bend it to my specification. Thanks for all replies !!!
  2. Thanks Impulse. Yeah, difficult to find these places in Chonburi. We don't have a China Town as as I know ! I'll keep on looking ... luudee
  3. Hi Guys and Gals, I need to have some L brackets custom-made, preferably from aluminum. 14 x 3 cm, 4 mm thick ... I have a drawing as well. Does anybody know of an Aluminum work shop who can do some custom work ? Preferably, Pattaya and surrounding Areas. Many Thanks !!! luudee
  4. Hi Guys, I have two Aster99 Filters, which I would like to replace the sand in. I have read the "sand issue" thread and am now considering Zeolite or Eco Clear. It seems to be impossible to find unbiased 3rd party reviews and comparisons. What have you replaced YOU Pool sand with ? Does it make sense to mix ? One Filter one compound, the other another compound ? What's the cost for Zeolite and Eco Clear ? Where to buy (I am in Pattaya) ? Attached is the picture of my Pool Filter Model. I have two of those. Any advice appreciated! luudee
  5. Hi Guys, does anybody know where I can buy a Pentair/Onga LTP400 Pump Lid in Thailand ? (Pentair part#: 800897K) Thanks ! rudi
  6. I have recently build the baby in the picture. Ended up ordering the case from Alibaba. Was around $460 USD with shipping and some extra cables for the back plane. Delivery was very fast, and quality quite impressive as well. rudi
  7. Hi Crossy, Couple of weeks ago I bought DTECH VD067. It's HDMI and USB over IP. About 4300 baht on shopee. Unfortunately, the transmitter has it's on DHCP server which messed up my network, so I had to run a dedicated line between the transmitter and receiver. Other than that it works ok, with the expected lag ... Best Regards, rudi
  8. That is not what I see. I often upload and download file that are in the 100GB range. International downloads can be much slower than the domestic line rate that I pay for, I am well aware of that. My complain is the speed-drop between my modem and the nearest 3BB server. Once the speed drops, it stays at the lower rate until I reboot the modem. The speed reported by speed test is usually quite accurate and reflects the down/up-load time I see.
  9. Did that a dozen time, they have seen for themselves the slow speed ... all they do is reboot the modem.
  10. Yeah, I know the bandwidth is oversold/over-committed ... but it should get back up to the package speed I am paying for. However, in my case it stays at the slower speed until I reboot the modem ... rudi
  11. Why do you post TWICE if you have nothing helpful to contribute?
  12. Thank you for letting me know what I do and do not notice ... really clever ...
  13. I subscribe to the 1000/1000 Mbps package with 3BB. First Problem ----------------- Something drops my speed on a daily basis to around 250/250 Mbps. After power cycling (or rebooting) the modem, I am back to what I expect. The "technicians/engineers" have been here a dozen or so times, reboot the modem, sit around for half an hour, and then "Here we fixed it mister ..." Any idea what's going on? Second issue ---------------- I am subscribing to 1000/1000 Mbps, but I only get 930/930 Mbps. I suspect that is due to the LAN port being only 1Gbps as well, and I am loosing bandwidth due to protocol overhead. I tried to explain it to the 3BB guys, but they don't get it. Does anybody know if there are alternative modems I can use that have a faster LAN interface? Many Thanks, rudi
×
×
  • Create New...