Jonathan Fairfield Posted July 13, 2018 Share Posted July 13, 2018 Fantastic! School kids collect thousands of ring pulls for those less fortunate Halle and her brother Buddy with the ring pulls the collected Two children in Nakhon Si Thammarat have collected more than 8,000 aluminium ring pulls that will be used to help create prosthetics for amputees in Thailand. Halle, 8, and her brother Buddy, 6, embarked on the heartwarming venture after being told at school how the ring pulls can be reused to create prosthetics. The children's British father Chris, who has lived in Kapang Thongsong Nakhon Si Thammarat since 2002 with his Thai wife Laddawan and the children, told Thaivisa how Halle and Buddy first began collecting the ring pulls when they would go and visit their Granddad, Chris’s father, who lives in Ao Nang, Krabi. They started by collecting the ring pulls from cans that had washed up on the beach. Before long they had a collected enough ring pulls to fill a small bag, which they took to school and gave to their teacher. However, they didn’t hear much about it from the school after that. Halle with her Grandad after collecting ring pulls in Krabi Unperturbed, a determined Halle decided she was going to continue collecting the ring pulls and hand them in herself to Nakhon Si Thammarat Hospital. By now, Halle, Buddy and her granddad were regularly visiting massage huts along the beaches in Krabi and removing the ring pulls from cans. During their school holidays the kids managed to fill three much larger bags, eventually collecting a whopping 8,623 ring pulls! Halle collecting ring pulls from cans discarded at beaches in Krabi On 7 July, Halle and Buddy handed in the ring pulls to Nakhon Si Thammarat Hospital where they will be recycled for use in prosthetics for people in Thailand. And the kids won't stop there. Halle, who started collecting the ring pulls out of her own free will, has told her father how she plans to collect even more when she stays with her granddad during the next school holidays. Halle handing over the ring pulls to officials at Nakhon Si Thammarat hospital -- © Copyright Thai Visa News 2018-07-13 Link to comment Share on other sites More sharing options...
sirocco Posted July 13, 2018 Share Posted July 13, 2018 a big congratulations to these young children. Link to comment Share on other sites More sharing options...
tryasimight Posted July 13, 2018 Share Posted July 13, 2018 When my kids went to school the teacher wanted to show them what a million was. The school collected over a million ring pulls. Not bad for a town of 4,500 people. Mining town in the northern territory of Australia in the 1990's. Lots of beer drunk there. Link to comment Share on other sites More sharing options...
Carlos Primeros Posted July 13, 2018 Share Posted July 13, 2018 I just wonder, how on earth, they can be using these ring pulls for prostetics? These ring pulls are exactly they same material as the alu can. They are just rolled and stamped... Does anybody know? Link to comment Share on other sites More sharing options...
Bsdk Posted July 14, 2018 Share Posted July 14, 2018 i think the can has a layer with something inside so the beer or soda can last while,and to exspencive to remove,just a guess Link to comment Share on other sites More sharing options...
sirocco Posted July 14, 2018 Share Posted July 14, 2018 hello, only the ring and cover are guaranteed 100% aluminum. For some parts or objects, must be sustainable and solid. (Eg chair for motor handicapped) But the can can be recycled in various ways and more and more we have done in aluminum. Link to comment Share on other sites More sharing options...
TPI Posted July 14, 2018 Share Posted July 14, 2018 23 hours ago, Carlos Primeros said: I just wonder, how on earth, they can be using these ring pulls for prostetics? These ring pulls are exactly they same material as the alu can. They are just rolled and stamped... Does anybody know? I'm not sure but wasn't this a cruel scam practiced on school children a few years ago in Oz?? Then it was plastic bag ties on bread? Link to comment Share on other sites More sharing options...
TPI Posted July 14, 2018 Share Posted July 14, 2018 5 hours ago, sirocco said: hello, only the ring and cover are guaranteed 100% aluminum. For some parts or objects, must be sustainable and solid. (Eg chair for motor handicapped) But the can can be recycled in various ways and more and more we have done in aluminum. In an investigation in Oz they found that the collection and delivery to Alcoa of aluminium cans were in fact sent to land fill as it's too expensive to recycle the cans, it's cheaper to use raw material! Link to comment Share on other sites More sharing options...
AsiaHand Posted July 22, 2018 Share Posted July 22, 2018 On 7/13/2018 at 9:59 PM, Carlos Primeros said: I just wonder, how on earth, they can be using these ring pulls for prostetics? These ring pulls are exactly they same material as the alu can. They are just rolled and stamped... Does anybody know? The "ring pulls for prosthetic s" collecting has been a SCAM for many years in many countries..Have you ever heard of an aluminum can manufacturing company calming to have received these ring pulls and then donated money for prosthetic to a hospital? Have you ever read in any European or American news paper reporting about the collecting of ring pulls ? No because they are not in the business of promoting unsubstantiated roomers and obvious scams.But then again the Thai media seems to be. seems to be. Link to comment Share on other sites More sharing options...
AsiaHand Posted July 22, 2018 Share Posted July 22, 2018 On 7/14/2018 at 9:41 PM, TPI said: In an investigation in Oz they found that the collection and delivery to Alcoa of aluminium cans were in fact sent to land fill as it's too expensive to recycle the cans, it's cheaper to use raw material! Elsewhere in the world the aluminum cans are recycled so I think that you are wrong,unless "OZ" is way behind the times of recycling. Link to comment Share on other sites More sharing options...
Damrongsak Posted July 22, 2018 Share Posted July 22, 2018 Production of metallic aluminum is very electricity-intensive. Ore is everywhere, but it costs a lot to refine and smelt. I don't recall if the pop tabs are a different alloy than the rest of the can. People here in the U.S. also collect the tabs. I heard of one school that collected aluminum. Kids would bring in cans. One kid brought in an aluminum engine block or heads. He won, LOL. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.