jvs Posted December 8, 2019 Share Posted December 8, 2019 Just finished redoing the shop and ow it is time to look for a tablesaw. Nothing fancy but i guess a ten inch blade is what i am looking for. I have been comparing some in the shops but i would rather rely on peoples experience. So,what is a good table saw?Or better home made? Link to comment Share on other sites More sharing options...
CharlieH Posted December 8, 2019 Share Posted December 8, 2019 I have two, I made one by inverting a circular saw and I also bought the Stanley table saw. ( as below) They both are great for occasional D-I-Y use and projects. I have no complaints with the Stanley products. Good deal for the price. https://www.lazada.co.th/products/stanley-10-stst1825-1800w-2-2-i166936436-s205526901.html?spm=a2o4m.searchlist.list.1.26af52ecIuCeGc&search=1 Link to comment Share on other sites More sharing options...
jvs Posted December 8, 2019 Author Share Posted December 8, 2019 Thank you for that Charlie,looks like a good price for the Stanley. Strong enough motor to do most jobs. Link to comment Share on other sites More sharing options...
sometimewoodworker Posted December 8, 2019 Share Posted December 8, 2019 There is also the Table for saw and router made by ThaiCarpenter that will take a router as well. It maybe worth taking a look. i have a router table made by them and it’s quite good. Link to comment Share on other sites More sharing options...
Crossy Posted December 8, 2019 Share Posted December 8, 2019 9 hours ago, CharlieH said: I have two, I made one by inverting a circular saw and I also bought the Stanley table saw. ( as below) I have the Stanley too, it's fine for occasional DIY, at a sensible price. Link to comment Share on other sites More sharing options...
RideJocky Posted December 9, 2019 Share Posted December 9, 2019 The Stanley is direct-drive, yes? What is the maximum depth of cut with the included blade? Is the rip-fence reasonably robust and does it hold well? How is the miter gage? Thanks! Link to comment Share on other sites More sharing options...
RideJocky Posted December 9, 2019 Share Posted December 9, 2019 Oh, and is blade guard/anti-kick-back easy to on and off? About how long is the arbor? thanks again Link to comment Share on other sites More sharing options...
jvs Posted December 30, 2019 Author Share Posted December 30, 2019 Thank you all for your input,bought a Stanley today and i think it will work fine for me. Was thinking to get a more expensive one made by De walt but you know the baht and all that. Link to comment Share on other sites More sharing options...
fruitman Posted December 30, 2019 Share Posted December 30, 2019 I would go for the homemade one from Somchai the handyman who can also do electrics. I mean, you have healthcare insurance so why spend the extra bahts for some safe product from a real brand? Link to comment Share on other sites More sharing options...
fruitman Posted December 30, 2019 Share Posted December 30, 2019 A good tablesaw is a Festool.....that's what the pro's use. Link to comment Share on other sites More sharing options...
sometimewoodworker Posted December 30, 2019 Share Posted December 30, 2019 4 hours ago, fruitman said: Link to comment Share on other sites More sharing options...
sometimewoodworker Posted December 30, 2019 Share Posted December 30, 2019 4 hours ago, fruitman said: A good tablesaw is a Festool.....that's what the pro's use. No body should be buying those until the ones incorporating the SawStop system is available. Until then a SawStop is the safer bet. Link to comment Share on other sites More sharing options...
WayWokeWhiteGuy Posted December 31, 2019 Share Posted December 31, 2019 17 hours ago, fruitman said: A good tablesaw is a Festool.....that's what the pro's use. Do they even make a table saw? Link to comment Share on other sites More sharing options...
sometimewoodworker Posted December 31, 2019 Share Posted December 31, 2019 1 hour ago, WayWokeWhiteGuy said: 18 hours ago, fruitman said: A good tablesaw is a Festool.....that's what the pro's use. Do they even make a table saw? Yes and no the; Trimming saw PRECISIOCS 50 from £1,135 and Trimming saw PRECISIOCS 70 up to £2,937 don’t really count as full table saws but for small stuff they are great. so a SawStop contractor saw from $1,399 is a good option. Link to comment Share on other sites More sharing options...
Pilotman Posted December 31, 2019 Share Posted December 31, 2019 Saw (sorry about the pun) one in Mega Home, Ban Chang yesterday. Link to comment Share on other sites More sharing options...
canopy Posted December 31, 2019 Share Posted December 31, 2019 Festool makes a table saw. A few downsides: it is only 8" which is too small for many purposes, also a very small table in all dimensions (though extensions are available for a price), flimsy fence, and extremely expensive. Upside is you can use the same saw as your table saw, remove it and use it as a circular saw, or put it in a festool track and use it as a track saw (3 in 1 functions). It also packs away into very compact boxes. Table is made of lightweight aluminum so won't rust away like others. Makita is a great saw, but the table is low quality. I would recommend Dewalt. Link to comment Share on other sites More sharing options...
sometimewoodworker Posted December 31, 2019 Share Posted December 31, 2019 5 hours ago, canopy said: Festool makes a table saw. A few downsides: it is only 8" which is too small for many purposes, also a very small table in all dimensions (though extensions are available for a price), flimsy fence, and extremely expensive. Upside is you can use the same saw as your table saw, remove it and use it as a circular saw, or put it in a festool track and use it as a track saw (3 in 1 functions). It also packs away into very compact boxes. Table is made of lightweight aluminum so won't rust away like others. Makita is a great saw, but the table is low quality. I would recommend Dewalt. The Festool PRECISIOCS are not tables for the track saws but dedicated portable able saws, the fences are hardly flimsy. It has a unique sliding action that I’ve never seen on any other saw. I agree on the pricing but the tools are a pleasure to use. Link to comment Share on other sites More sharing options...
David B in Thailand Posted January 4, 2020 Share Posted January 4, 2020 Not sure the Stanley is as accurate as the two Bosch GTS 10J or Bosch GTS 10XC Table saws I see in Buriram. Big Wood Brand is another table saw brand that is worth the consideration of the OP. Bosch offers some nice folding table stands for compound miter saws and 10 inch table saws. Link to comment Share on other sites More sharing options...
sometimewoodworker Posted January 5, 2020 Share Posted January 5, 2020 7 hours ago, David B in Thailand said: Not sure the Stanley is as accurate as the two Bosch GTS 10J or Bosch GTS 10XC Table saws I see in Buriram. Big Wood Brand is another table saw brand that is worth the consideration of the OP. Bosch offers some nice folding table stands for compound miter saws and 10 inch table saws. The Bigwood table saws are in a totally different category to the other saws mentioned, they are portable contractors 10” saws while the cheaper Bigwood is a cabinet saw with a cast iron table and sliding table (87kg), the next one is a 12” saw again with a cast iron top (125kg) Link to comment Share on other sites More sharing options...
neeray Posted January 5, 2020 Share Posted January 5, 2020 Make sure you equip it with a carbide tipped blade. A 24 tooth is a good choice for general work. Much smoother cuts whether ripping or cross cutting. Link to comment Share on other sites More sharing options...
sometimewoodworker Posted January 5, 2020 Share Posted January 5, 2020 38 minutes ago, neeray said: Make sure you equip it with a carbide tipped blade. A 24 tooth is a good choice for general work. Much smoother cuts whether ripping or cross cutting. I don’t know of any saws that don’t have carbide tipped blades and the 24 tooth recommendation in a 12” saw is a very course one, it’s good in an 8” for a 10” you need a 30 tooth blade and in a 12” a 36 Tooth blade to get the equivalent performance. But for any saw to get top class results you need to spend a few thousand Baht on a top class blade. Link to comment Share on other sites More sharing options...
sometimewoodworker Posted January 5, 2020 Share Posted January 5, 2020 Just now, sometimewoodworker said: I don’t know of any saws that don’t have carbide tipped blades and the 24 tooth recommendation in a 12” saw is course blade, it’s good in an 8” for a 10” you need a 30 tooth blade and in a 12” a 36 Tooth blade to get the equivalent performance. But for any saw to get top class results you need to spend a few thousand Baht on a top class blade. Link to comment Share on other sites More sharing options...
mogandave Posted January 6, 2020 Share Posted January 6, 2020 I think the grind is almost as important as the quality of the blade. Best to have a variety of blades depending on what you’re doing and how critical the quality of the cut it. Having saw blades (and other cutting tools) reground here seems to be pricey, at least the the venders I’ve used. Anyone have recommendations? Link to comment Share on other sites More sharing options...
sometimewoodworker Posted January 6, 2020 Share Posted January 6, 2020 1 hour ago, mogandave said: I think the grind is almost as important as the quality of the blade. Best to have a variety of blades depending on what you’re doing and how critical the quality of the cut it. Having saw blades (and other cutting tools) reground here seems to be pricey, at least the the venders I’ve used. Anyone have recommendations? Probably not much use to you but there is an excellent little shop in Udon Thani that does a good job on both saw blades and thicknesser knives Link to comment Share on other sites More sharing options...
jvs Posted January 7, 2020 Author Share Posted January 7, 2020 I posted already that i bought the Stanley,got it second hand off someone who is moving back to the UK.I paid 3000 baht and the machine looks like new. Did a few things already and soon it will have paid for itself. Link to comment Share on other sites More sharing options...
Janicer Posted January 9, 2020 Share Posted January 9, 2020 I would go for the homemade one from Somchai the handyman who can also do electrics. Use the newer model and you won't miss your old ones. This is where they came from. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.