I need help please to understand my Optical Power info

[SpecxHQ]

Hello ım Using Gpon Huawei. I living Turkey ı have signal quality is good or not ? my apartman 1x8 using fiber splitter but ı dont know how to understand. this signal quality. thanks. 486 mt. in the outside olt. fibre cable. my packet 100 mbit / 10 mbit

Fiber splitter

 

Not Fiber splitter. directly connetion ont and main connect.

 

 

 

Edited June 2, 2020 by SpecxHQ

[muratremix]

if you get provided speed, then your signal is good enough.

[RichCor]

Understanding this isn't really important unless you're trying to troubleshoot a connection issue. If your 'current values' are withing the stated 'reference values' then the service should work.

 

Not sure why you'd want a local splitter prior to your ONT, especially if it's not being utilized for anything. A 'splitter' will halve the original available signal (as seen in your "RX Optical Power" samples).

[Pib]

Your optical power levels (downstream RX and upstream TX) are fine as long as they are between the "reference levels."   The reference levels are the levels of power the router/equipment will operate properly within.    And too much power can be as bad as not enough power.    Your optical power levels are just fine....well within the reference levels.

 

[SpecxHQ]

Thanks for information ))