seesip Posted October 12, 2020 Share Posted October 12, 2020 The setup I currently have is getting misaligned every few weeks and starts making loud grinding noises. Hoping there's a different option available. Current setup is a motor at ground level with gear that fits in to a long strip along the bottom of the gate. Would appreciate some referrals! Link to comment Share on other sites More sharing options...
noise Posted October 14, 2020 Share Posted October 14, 2020 (edited) was having problems and replaced my motor and wheels. Turned out the new motor and wheels were both a little higher than the old set up. The mechanic worked by himself, put a shim over the wheels to raise the gate to the proper height (less that an inch higher), and installed and wired the motor into the existing wire to the switch inside the house. And gave us 3 remotes. Turns out the sort of new remotes I got a while ago after a repair also worked. So now we have lots of remotes and a great gate opener. You can read the telephone numbers off the photos and give them a call. Plus the PDF file bill has his number on it and the other PDF file shows the motor details. Gate Motor DEA SLD424HSD.pdf Motor Replace Estimate 17 Feb 2020.pdf Edited October 14, 2020 by noise Link to comment Share on other sites More sharing options...
DrTuner Posted October 14, 2020 Share Posted October 14, 2020 Why is it getting getting misaligned? Worn out bearings or bad installation? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now